robonetics solutions


Sorter


Working environment

arrow Environment temperature: -50 ~ 45℃

arrow Relative humidity: 20 ~ 95%

arrow The site does not allow the medium with explosive danger, and the surrounding medium should not contain corrosion metal and destroying insulation gas and conductive medium.


Equipment composition

The modular belt sorter is composed of plastic belt, motor and control cabinet. The core part is the plastic modular roller belt. The modular belt supplies the straight driving force. The rollers supplies the switching force for left and right sorting so as to achieve two-way diverting, so the goods can be sorted.

General view:

Modular roller belt: Supply driven force for the parcel moving.

Carbon steel plate: The mechanical structure of the equipment.

Electrical connector: Connect cabinet and servo sorting belt, convenient for disassembling and maintenance.

Maintenance window: Through the window can observe the internal structure, convenient for maintenance.

Motor: Driven force

Rollers: Increase the smooth moving.


Technical data and parameter
Item Content Data Remark
1. Dimension 1150mm (Bilateral) Customized
2. Height Above 500mm Customized
3. Power supply AC 380V
4. Max. speed 1.2 m/s
5. Theoretically
sorting efficient
4800PCS/H
6. Sorting range Cartons, parcels, strong package with flat bottom

Application

This equipment is used for the occasions of sorting, diverting and conveying together. Can be used with conveyors, scanning and weighing and software.


Installation and commissioning

arrow All parts are driven by connecting rods, easy to assemble, interchangeable and universal.

arrow The installation and commissioning of the equipment are required to operate by our professional and technical personnel or the operators authorized by Robonetics. Equipment must be installed with matched mounting brackets. Forklift or crane will be used to move the equipment’s to place it in the designated location. Make sure the equipment aligns and all fasteners are installed firmly.

arrow After the main structure of the equipment is installed, then start to install the electrical control components. All the equipment has an independent control cabinet, connected with the main equipment by communication bus standard and fast joints to ensure the fast and accurate installation.

arrow After finishing installation, start to connect the software and test. It can be used with independent system or with other systems.

Maintenance

Mechanical part: Routine inspection of the drive shaft, make sure there is enough oil in the bearing. It is necessary to clean up the surface dust and dirt regularly to ensure the smooth operation of the mechanism.

Electric part: Daily inspection of electrical components in the control cabinet to prevent the leakage of mouse biting or water soaking.